So you’ve got a new SeaSucker bike rack (or maybe just a new HUSKE fork mount); now you need to get the right HUSKE Plugs to fit your bike. If you don’t know what front hub your bike has, it’s not that hard to figure out - all you have to do is measu
There’s no set time limit on our vacuum mounts. It depends in part on the surface you attach to, the condition of the vacuum mount, the load you put on it, and other factors. As for surfaces to attach to, vacuum mounts in general were designed to car
Applying to the SeaSucker Captains Program is simple - follow this link to submit your application!
The Talon is designed to work with the most amount of vehicles. It can attach to the roof, trunk, hatchback, or back glass of your SUV. With Three 6” vacuum cups on the front of the rack in a triangle shape it can bridge the gap between body panels.
Using Your SeaSucker Products in Hot TemperaturesAll SeaSucker vacuum mounts have UV inhibitors built right in, so they’re made to last. However, UV rays eventually break down almost any sort of rubber or plastic, so store your SeaSuckers out of the
Mounting a SeaSucker rack to a glass roof is completely safe and reliable. Here are a few videos demonstrating SeaSucker installations on vehicles with glass roofs:. SeaSucker Rack Install Example 1. SeaSucker Rack Install Example 2. SeaSucker Rack I
Proudly handcrafted in the USA, our 4.5" and 6" SeaSucker vacuum cups provide a strong, reliable hold on any smooth, non-porous surface, including:. Glass. Metal. Plastic. Ceramic. Enamel. Porcelain. For best results, we recommend lightly moistening
We recommend that you mount your SeaSucker RotopaX Tank Holder on a vertical surface (back glass on SUV, side window of van) with the mounts stacked vertically. Here is a link to the RotopaX Tank Holder. Here is a link to the 5-Gallon RotopaX Tank Ho
Is your Flex-X Phone Mount spinning or wobbling? Here's a quick fix!. If you have an older version of the mount (with a SeaSucker sticker covering the entire circle), gently peel back the sticker to reveal a screw. Tighten this screw to reduce or eli
We’re often asked, “Will these work on my non-skid boat deck?” And the answer is: it depends. Honestly, it really does. It depends on how aggressive your non-skid surface is. If your deck’s non-skid texture is relatively mild, the SeaSucker should wo
Unfortunately, we don’t sell these products without a SeaSucker attached. However, we do offer individual SeaSucker vacuum mounts separately. Best regards,The SeaSucker Team
Absolutely! SeaSucker was born on the water in Bradenton, Florida, where salt air and tough marine conditions are part of everyday life. We've been making marine-grade products for over 20 years, specifically designed for both saltwater and freshwate