SeaSucker US logo
SeaSucker US logo

All articles

Product Specific Related Articles

Naked Flex Mount

The Naked Flex Mount from SeaSucker is a great solution for mounting iPads and tablets. With its powerful 4.5″ vacuum mount that attaches directly to the back of your device, there’s no need to worry about buying a new bracket every time you upgrade.

SeaSucker Handle

The usefulness of our Medium-Duty Handle and Heavy-Duty Handle never fails to surprise people. Incredible holding power provided by two 6" SeaSucker vacuum mounts on the Heavy-Duty, and two 4.5" vacuum mounts on the Medium-Duty, allows it to be used

Pro Series Dive Rack

Thank you for reaching out to us regarding the SeaSucker Pro Series Dive Rack! We're happy to help you get the information you need. The Pro Series Dive Rack is designed with divers in mind, offering a strong, secure, and non-permanent mounting solut

Garmin Striker Mount

The Garmin Striker Mount was originally created for a boat club member who couldn't hard mount their GPS/fish finder because they get a different boat every time they go out. The solution was to mount a SeaSucker to it, but we took it a step further

4.5" SeaSucker w/ LP Housing

LP stands for Low Profile – this SeaSucker is a tiny bit shorter than a standard SeaSucker, but it’s got a more refined look and different mounting points. You can attach to stainless 1/4-20 inserts in the top and side, or bolt through the slot in th

Fisherman's Cup Holder

The Fisherman's Cup Holder is only available in the vertical mount option. If you're looking for a similar alternative, we recommend the 4-Cup Horizontal Mount. You can check it out here: 4-Cup Horizontal Mount. Thanks,. SeaSucker

Universal Filet Table

The Universal Filet Table. The working surface is approximately 11”x17” and has built-in knife sheaths in the side walls for safety and convenience. Made of durable and UV-resistant HDPE and protected by SeaSucker’s limited lifetime warranty. Check i

Board Rack

Our Board Rack attaches to the roof of just about any car with our super-strong 6″ SeaSucker vacuum mounts. That means no clips, no bars, and no hassle. Pump the rack on and strap the board down – it’s that easy. Minor assembly required. Check out th

1-Cup Holder - Vertical Mount

Simple, Secure, and Ready to GoKeep your drink within easy reach with this no-fuss cup holder, mounted using a powerful yet easy-to-use 4.5" SeaSucker vacuum mount. Just press it onto any smooth, vertical surface—like the side of your boat console—an

Monkey Bars Surf Kit

Our Monkey Bars are awesome and you should surf more. To encourage you, we're throwing discounted pads and straps into the package to turn your new Monkey Bars into a surfboard or paddle board carrying wonder. Our one-size-fits-all roof rack system i

Starlink Mini Mount

Introducing the Starlink Mini Mount – the ultimate solution for on-the-go connectivity. Designed with flexibility and portability in mind, this compact mount is perfect for smaller rigs, sunroof applications, and anyone needing a fast and reliable in

Medium Strap

This rugged rubber clamp with an adjustable strap is mounted on a powerful 4.5" SeaSucker vacuum base, giving you nearly endless mounting options. Perfect for securing gaffs, nets, push poles, or other gear—wherever you need them. Size & Specs:. Exte

Oval SeaSucker

SeaSucker vacuum mounts are engineered for versatility and strength, making them ideal for countless applications. Whether you're working on your boat, RV, home, or a custom DIY project, these mounts let you attach gear to any rigid, non-porous surfa

GMRS Antenna Mount

The SeaSucker GMRS Antenna Mount comes with a Nagoya mount, five meter RG58 cable, and a Bingfu Antenna. The mount is fixed to a 4.5" SeaSucker which allows you to have mobility capabilities that are unlike the rest. Size & Specs:. Check it out, here

6" SeaSucker

The 6" SeaSucker vacuum cup lends itself to an almost infinite number of uses. If you need to attach something to a rigid, non-porous surface without drilling any holes, this is the best way to do it. Size & Specs:. Available in white or black. Best

Single Tank Strap

Single Tank Strap. Secure a wide range of gear with ease using the Single Tank Strap. Featuring a heavy-duty black rubber strap mounted on a powerful yet easy-to-use 6″ SeaSucker, this versatile mount holds everything from small items like fire extin

Pro Series 3-Rod Holder

Our Pro Series rod holders are a step up from the base models they replace. They still mount when and where you need them and can be attached or removed in seconds, but with added functionality and style!. We've ditched the bulky aluminum track in fa

Mirror Mount

We don't like to brag, but SeaSucker has the best mirror mount on the market. With our vacuum mount technology, you can mount it anywhere on your vehicle or boat in seconds and remove just as quickly. Plus, with over 120 pounds of pull-strength per m

Pro Series Rod Rack

Built for offshore boating, the Pro Series Rod Rack holds up to 8 rods—ideal for both casual anglers and serious fishermen who never want to leave gear behind. Constructed from durable HDPE and lined with soft, UV-stabilized rubber, it securely holds

Teaser Reel

A teaser reel in fishing is a specialized reel used to deploy and retrieve teaser lures—unhooked lures or bait designed to attract game fish to the boat without actually hooking them. They are specifically used for most any billfish except swordfish

Kitchen Station 2.0

The Kitchen Station 2.0 gives you a 16”x20” flat surface for prep, staging, or whatever you need room for. Need even more space? The Kitchen Station 2.0 w/ Extension adds another 12”x16” on top of that! Made of HDPE for durability. Breaks down into b

RotoPAX Tanks

Whether you need extra water for your sink station or drinking supply, or a few gallons of diesel to get back to home base, we’ve got you covered. Our RotoPAX tanks are reliable, durable, and designed for every type of journey. Available RotoPAX Tank

Flex-X Phone Mount

You can mount it just about anywhere, and the bendable arm gives you all the positional flexibility you could ask for. This is our favorite mount for cell phones. Choose from two sizes: standard holds items up to 3.25", XL holds items up to 4.5" (you

Pallavicini Ski Rack

Like all SeaSucker products, the Pallavicini attaches securely when needed and removes cleanly when not, thanks to two powerful 6" SeaSuckers on each carrier. The top of each carrier comes off for loading up to two snowboards or four pairs of skis, t

The Classic Ski Rack v.s. The Pallavicini Ski Rack

The newly redesigned SeaSucker Ski Rack is the easiest way to get your gear to the mountain. Powerful 6” SeaSucker vacuum mounts hold the clamshell style carriers securely in place. Soft rubber padding safely grip your skis or snowboards without scra

LP vs Standard SeaSucker

The Standard SeaSucker measures 2 1/2 inches. The SeaSucker w/ LP Housing measures right at 2". The LP SeaSucker also features two, 1/4 -20 threads for customization. Best regards,The SeaSucker Team

Solar Flex Mount

Let SeaSucker give you the ultimate flexibility when mounting your solar panels! Choose between our 1, 2, or 3-pack of solar flex mounts to mount solar panels of any size. Using the included Flex Arm, you can adjust the position of your solar panel t

WaterPORT x SeaSucker Tank Mount

Our WaterPORT x SeaSucker Tank Mount takes all the hassle out of mounting the tank on your vehicle. It attaches with three of our powerful 6" vacuum mounts, letting you put it where it's most needed, most accessible, or even most out of the way. And

Waste Band Clips (Pair)

Lost the clips from your Small or Large Waste Band? Pick up another pair, here!. Best regards,The SeaSucker Team

Flex-X Phone Adapter

If you already own our Naked Flex Mount or GoPro Flex Mount, give yourself some added flexibility with the Flex-X Phone Adapter. This attachment quickly screws onto your flex arm, allowing you to swap back and forth between a tablet mount, GoPro moun

Replacement Vacuum Pump

Replacement vacuum pump for both 4.5" and 6" SeaSuckers. Available in white or black. Best regards,The SeaSucker Team

HUSKE Fork Mount Body

The HUSKE (HUb Standards Keep Evolving) is a universal fork mount that handles the most common fork mount standards of today and tomorrow. Interchangeable plugs (sold separately) are available for 9x100mm Quick Release, 12x100mm Thru-Axle, 15mmx100 T

The Sink Station

The Sink StationSM9106B. The Sink Station puts a washbasin right on your vehicle or trailer, held securely by two powerful SeaSucker vacuum mounts. The sink basin is 12”x9.5” and 3.5” deep, but collapses to 1” for easy travel storage. Pair this with

20 Common Rack Accessories

Here are 20 commonly purchased SeaSucker Rack Accessories:. 1. HUSKE Fork Mount Body. 2. HUSKE 9x100mm Quick Release Plugs - No Axle. 3. HUSKE 5x100mm. 4. HUSKE 9x100mm Quick Release Plugs w/ QR Axle. 5. HUSKE 12x100mm Thru-Axle Plugs. 6. HUSKE 12x11

2-Cup Holder - Horizontal Mount

Just the basics here - if you want to hold a couple of cans or bottles on a horizontal surface like the top of your console, cooler, or bait tank, this cup holder is what you need. The 2-Cup Holder attaches with a powerful-yet-simple-to-use SeaSucker

Replacement Skewer Assembly

Replacement Skewer AssemblyCX1351. The Skewer Assembly can be purchased, here. Best regards,The SeaSucker Team

Magnetic Antenna Mount

Magnetic antenna mounts are great for easy installation, but dropping that antenna on a SeaSucker Magnetic Antenna Mount gives you more functionality in return for the extra 10 seconds it'll take to attach it. In addition to metal surfaces, the SeaSu

Flight Deck - Front Wheel Holder Upgrade

The Flight Deck turns your regular Rear Wheel Strap into a front-wheel holding superstar. It can be used with the Talon, Mini Bomber or Bomber, and uses the existing Rear Wheel Strap as part of the package. The front wheel mount features elongated en

Heavy-Duty Trolling Unit

Have you been looking for a way to get a center line out into your spread? Look no further. The polished and anodized aluminum on this super-strong rod holder matches the look of your welded-on rod holders, but you can take this one off when you’re n

Cup Holder Insert

Replacement 3.5" cup holder insert for SeaSucker cup holders. Inserts feature pre-drilled holes at the bottom for water drainage. Available in white or black. Specs:. Best regards,The SeaSucker Team

Rear Wheel Strap

This is same Rear Wheel Strap that comes standard in our Talon, Mini Bomber, and Bomber bike racks. The 6″ SeaSucker with a 1.5″ wide VELCRO® Brand strap secures your bike’s rear wheel and keep it from moving left or right when driving. Best regards,

7" Flex Arm

Replacement Flex Arm. 1/4-20 threaded studs on each end. Best regards,The SeaSucker Team

6" SeaSucker w/Stainless Steel D-Ring

The same 200+ pounds of holding power as the basic 6″ SeaSucker, but with a stainless steel D-ring for holding ropes, straps, etc. Our vacuum cups lend themselves to an almost infinite number of uses. If you need to attach something to a rigid, non-p

Double Tap

We originally envisioned the Double Tap as a cooler mount (one side to the cooler, the other to the bait tank, console, transome, etc.), but feel free to improvise with these two powerful vacuum mounts bolted back-to-back. The Double Tap is offered i

Pro Series 2-Rod Holder

Our Pro Series rod holders mount when and where you need them and can be attached or removed in seconds, but with added functionality and style! The Pro Series rod holders have removable pins at the bottom - take it out (and store it in the slot on t

Pro Series Dive Rack

This rack is made specifically for dive tanks, and can be bought for a single, 2-pack, 3-pack, or even as a 4-pack. This Dive Tank Rack is fully customizable to your needs. Our anodized aluminum bungee cord knobs can allow you to easily transform you

RotopaX Tank Holder 2-Gallon

Let us help you haul your RotopaX Tanks without any permanent mounts! Grab a SeaSucker RotopaX Tank Holder, powered by two 6" SeaSucker mounts, and easily attach your existing tank and hardware. Put your tanks on when you need them, remove in seconds

Replacement Stainless Steel "L" Bracket

Replacement stainless steel “L” bracket as used in the Large Table with “L” Bracket. No hardware included. Purchase the Replacement "L" Bracket, here. Best regards,The SeaSucker Team

Ridge Ready Monkey Bars

Jeep and truck owners - it's your time to shine. We have taken our classic Monkey Bars and made them compatible with any car that has ridges on the roof, so no one has to feel left out. Our Ridge Ready Monkey Bars are designed with four 3.25" oval cu

Basic Cleat

If you've got a boat, you've got lines that need to be secured. But, what if your cleats aren't exactly where you need them to be? What if you've got more lines than you know what to do with? Have no fear, we've got you. Don't let the name "Basic Cle

Pro Series Rod Rack

Designed specifically for offshore boating applications, this high-quality rack holds up to 8 rods, making it the perfect solution for both casual anglers and hardcore enthusiasts who never want to leave a rod behind. Crafted from durable HDPE and fe

Monkey Bars

Our one-size-fits-all roof rack system is dressed in black so it's ready for a night on the town or a stealth mission. Screw-together cross bars allow for compact storage when needed. The Monkey Bars feature round black powder-coated aluminum cross b

2-Cup Holder - Vertical Mount

Just the basics here - if you want to hold a couple of cans or bottles on a vertical surface like the side of your console or bait tank (or, if you want to get creative, on the side of your vehicle when tailgating), this cup holder is what you need.

4-Cup Holder - Horizontal Mount

This 4-cup holder mounts to horizontal surfaces like a console or table top, held in place by one powerful-yet-simple-to-use SeaSucker 4.5” vacuum mount, which means you can put it where you need it, when you need it. Details:. Specs:. Best regards,T

4.5" vs. 6" SeaSucker w/ Stainless Steel D-Ring

Hello! Thanks for your interest in the SeaSucker with Stainless Steel D-Ring. While these two products share a similar name, they differ in size and specifications. Here's a quick breakdown:. 4.5" SeaSucker with Stainless Steel D-RingSpecifications:.

The SeaSucker Talon - A One Bike Workhorse

The Talon Rack is our workhorse 1-bike carrier and our best seller. It’s a fork-mount-style rack featuring our always-up-to-date HUSKE Fork Mount. Three of our powerful (210lb pull-strength rated each) vacuum cups hold it securely on your car’s roof,

Action Camera Adapter

Black aluminum tripod adapter and stud, perfect for attaching to the top of a SeaSucker and turning it into a mount for GoPro and other action cameras with the same 2-slot mounting configuration. Specs:. Buy it here. Best regards,The SeaSucker Team

Waste Band - Large

There are few things we dislike more than empty cans or water bottles flying around the boat, so we’ve solved that problem quite nicely with our Waste Band garbage bag holders. Put a bag over the hoop, snap on the bag clips, and clean up that boat! M

HUSKE Fork Mount Body

The HUSKE (HUb Standards Keep Evolving) is a universal fork mount that handles the most common fork mount standards of today and tomorrow. Interchangeable plugs (sold separately) are available for 9x100mm Quick Release, 12x100mm Thru-Axle, 15mmx100 T

Flight Deck Thru-Axle Adapaters

The Add-On Front Wheel Holder and Flight Deck work great by themselves for QR front wheels, but if you've got a 12-100mm or 15-100mm front hub on your bike, you're going to need a set of Flight Deck Thru-Axle Adapters to make it work. Includes two pl

Mini Bomber Rack

The Mini Bomber is probably our most versatile model. We typically recommend this model for e-bike riders. This 2-bike fork-mount rack is designed to attach to your car’s roof, trunk, or your SUV’s back glass. The HDPE body flexes to conform to your

Class Ski Rack

The Classic Ski Rack is the easiest way to get your gear to the mountain. Powerful 6” SeaSucker vacuum mounts hold the clamshell style carriers securely in place. Soft rubber padding safely grip your skis or snowboards without scratching them. Lightw

SeaSucker Antenna Mounts

SeaSucker offers a range of antenna mounts designed to fit many of today’s most popular antennas. Our current selection includes:. GMRS Antenna Mount. Magnetic Antenna Mount. Midland Antenna Mount. weBoost Mount. All of these mounts are available now

Fly Rod Holder

Finally, a fly-rod holder you can take with you and mount anywhere! No more trying to make your fly rod fit into conventional/spinning rod holders. This is not a trolling unit and should only be used to carry your rod during transport. Details. Purch

SUP Rod Holder

Fishing on a paddle-board? We approve! The SUP Rod Holder features a Scotty Rocket Launcher so it can be adjusted in all directions. The powerful 6" vacuum cup attaches to your board or kayak or other boat, for that matter. The platform for this rod

Monkey Bars Surf Kit

Our Monkey Bars are awesome and you should surf more. To encourage you, we're throwing discounted pads and straps into the package to turn your new Monkey Bars into a surfboard or paddle board carrying wonder. Our one-size-fits-all roof rack system i

SeaSucker Products for Flags

Whether you're mounting a standard American flag to the side of your RV or proudly displaying your alma mater at the campsite or sandbar, we offer several versatile mounting solutions to help you do it in style. Best regards.The SeaSucker Team

The Grupetto

Three bikes on the car means three people in the car, which means three front wheels taking up valuable space. Give yourself some breathing room: buy The Grupetto and save big!. BOMBER: The Bomber is our 3-bike behemoth. It’s a fork-mount-style rack

Single Rod Holder

Our Single Rod Holder is perfect in so many ways. Simple to use, solidly-constructed, no unnecessary bells and whistles. It’s made to stick on your boat and hold one rod and that’s exactly what it does. You should have one for every fisherman on your

Bucket Mount

Whether you're storing bait, tools, or cold drinks, our 5-Gallon Bucket Mount keeps your bucket locked down and ready for action. Designed specifically for boaters, this mount features a custom-fit HDPE wrap that cradles your bucket with strength and

Fork Mount Hardware - Mini Bomber/Bomber

Includes two nuts, two 1/4-20 bolts and 2 washers for attaching a fork mount to a Mini Bomber or Bomber rack. NOTE: the bolts included here are not long enough to attach a fork mount on one of our Riser Blocks. Let us know if you need bolts for that

The Basking Bag

Standard Basking Bag. The Basking Bag is a long awaited solution from SeaSucker. Now, you can have a closable option for pitching trash or holding your dirty laundry. Equipped with a 4.5" vacuum-mount for 120 lb. of pull strength. Choose between our

Horizontal Rod Holders

If you want more rod, gaff, or boat hook storage along your gunwales, this is the product for you. Instead of holding your rods straight up and down like all of our other rod holders, these hold horizontally. The 4.5″ SeaSuckers mount them securely o

Pro Series Dive Rack

We're off the deep end for SeaSucker's new Pro Series Dive Rack. This rack is made specifically for dive tanks, and can be bought for a single, 2-pack, 3-pack, or even as a 4-pack. This Dive Tank Rack is fully customizable to your needs. Our anodized

weBoost Mount

You made the not-insignificant investment in a WeBoost Drive Reach Overland mobile phone signal booster, so now you need a slick way to mount the antenna on your rig. SeaSucker’s WeBoost Antenna Mount allows you to attach it wherever you need it, and

Hornet - Hatchback/SUV Bike Rack

Our Hornet 1-bike rack is a small-scale revolution. We call it the “Smallest Bike Rack in the World” because it is. The Hornet is far and away the most travel-friendly rack on the market, but it works equally well for everyday use. Unlike most other