Clean the vacuum pad with dish soap and a soft cloth or sponge. Make sure there is no dirt or debris on the sealing edge (the bottom outside edge of the vacuum pad) of the pad. Inspect the sealing edge for nicks or cuts – a nick or cut will allow air
Where Should I Attach My SeaSucker Bike Rack?. First things first - never mount your rack so that your bike will be sideways or backwards on your vehicle. That’s just not allowed in the SeaSucker universe. Deciding where to mount you rack depends in
A SeaSucker vacuum mount relies on two important components to create its powerful seal: the vacuum pad and the vacuum pump. The vacuum pump evacuates all of the air out from underneath the vacuum pad, which forms the seal. Working together, these tw
Thanks for reaching out! We're here to help with your bike rack installation. To ensure a strong and secure hold, we recommend adding a bit of moisture to the vacuum pads before applying them. Also, please make sure the pads and the mounting surface
Don’t let some jerk steal your bike (or skis, or whatever)! We've combined our Cable Anchor - Trunk with a sturdy cable lock. Since SeaSucker bike racks aren’t bolted on to rooftop bars, we came up with a way to keep your bike safe. A Cable Anchor is
For attaching your SUP to the side of your RV, we recommend a couple different options:. 1. The Board Rack - The Board Rack attaches to any roof or side of a vehicle with (6) 6" SeaSucker vacuum mounts. It comes with (2) 31" crossbars and a set of 10
Here's a step-by-step breakdown on installing the SeaSucker Talon bike rack. Watch video!. Best regards,The SeaSucker Team
Here are some photos of SeaSucker racks installed on Audi's for reference. Best regards,The SeaSucker Team
So, you just received some SeaSucker products and you're having trouble attaching them. No worries! Here is a great video tutorial on attaching several different SeaSucker products to a vehicle. Best regards,The SeaSucker Team